Production and quality

ISO certified standardized production of the highest quality Jetfloat elements

Thanks to our many years of experience in production, the JETFLOAT system guarantees you many advantages and first-class quality.

+ Production process:
Our parent company AKG produces all Jetfloat elements. Production process certified by ISO 9001: 2002 as well
ISO / TS 16949: 2009

+ Experience:

Experience in production and application since 1971.

JETFLOAT®INTERNATIONAL elements are made from the raw material LUPOLEN 5261 Z, a special high-density polyethylene (HD-PE). The manufacturer’s production certificate, BASELL Polyoelfine LyondellBasell, confirms that this raw material is also produced strictly according to ISO 9001 standards.

This material is the most suitable for modular pontoon systems.

All JETFLOAT elements and connecting bolts are blown from 100% pure Lupolen 5261 Z. No recycled material is used as it will decay in the sun and water within a few years

+ Flood caps:

Our flood caps are equipped with a saw thread and an O-ring seal (this special type of flood caps is only used by JETFLOAT International). This enables an airtight and watertight screw connection that is large enough to flood the elements with a garden hose. The flood caps can always be opened and closed for flooding.

+ Concave base:
The concave bottom guarantees better adhesion of the elements to the water surface.

+ Edge connector:
The nuts of the edge connectors snap into the notches on the underside of the connecting lugs with the anti-twist device.

The edge connectors and spacers are made from Lupolen 5261 Z in combination with another HD-PE type as an injection molded part.

+ Connecting bolt:
The connecting bolts are equipped with a cam system for locking and also secured with locking knobs to prevent them from being pulled out. The connecting bolts can only be locked and opened with the special assembly key. Weight of the pin 600 gr, also consists of LUPOLEN 5261 Z.